What's the advantage of the automatic lubrication system?
Why should we use the automatic lubrication system instead of the manual lubrication. And what's the advantage of the automatic lubrication system? This article will show you about this point.
In a study conducted by a major component manufacturer, it was determined that over 50% of bearing breakdowns come from improper lubrication. Insufficient lubrication and bearing contamination were the two biggest contributors to improper lubrication.
And manual lubrication could not provide the grease properly and timely. Just as the following picture show:
From the above graph, we can see via the red line that traditional manual lubrication has shortcomings or overmuch.
The blue line that automatic lubrication could provide the grease(oil) properly and timely.
1.If manual greasing interval is too long the grease film is lost causing the lube points to dry out creating friction and wear.
2.With manual greasing it is very difficult to control the grease volume with over lubrication becoming an environmental problem as well as greatly increased grease consumption.
3.Manual greasing can introduce contaminants into the lube points causing premature wear.
So the advantage of automatic lubrication:
1.Minimum downtime
2.Longer machine life
3.Eco-friendly
4.Save labor
More information: www.autolgroup.com
In a study conducted by a major component manufacturer, it was determined that over 50% of bearing breakdowns come from improper lubrication. Insufficient lubrication and bearing contamination were the two biggest contributors to improper lubrication.
And manual lubrication could not provide the grease properly and timely. Just as the following picture show:
From the above graph, we can see via the red line that traditional manual lubrication has shortcomings or overmuch.
The blue line that automatic lubrication could provide the grease(oil) properly and timely.
1.If manual greasing interval is too long the grease film is lost causing the lube points to dry out creating friction and wear.
2.With manual greasing it is very difficult to control the grease volume with over lubrication becoming an environmental problem as well as greatly increased grease consumption.
3.Manual greasing can introduce contaminants into the lube points causing premature wear.
So the advantage of automatic lubrication:
1.Minimum downtime
2.Longer machine life
3.Eco-friendly
4.Save labor
More information: www.autolgroup.com
Autol is the largest manufacturer of automatic lubrication system in China, take
China market share more than 70%, export to 30 countries.
评论
发表评论